FTTH ESC250d SC / UPC Field Assembly Quick Connector Fiber Optic Fast Connector
SL Fast Connector is a revolutionary field installable optical fiber connector that requires no epoxy and no polishing. The unique design of the patented mechanical splice body incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule. Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH.
Feature:
1.Low insertion loss
2.High return loss (low amounts of reflection at the interface)
3.Ease of installation
4.Low cost
Application:
1.CATV
2.Active device termination
3.Telecommunication networks
4.Metro
5.Local Area Networks (LANs)
Details:
| Part Number | SL-F-FCN-51 | Length | 51 mm |
| Connector Type | SC | Polishing | UPC or APC |
| Ferrule | Ceramic | V-Groove | Plastic material |
| Cable Diameters | 0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable |
| Insertion Loss | ≤ 0.3dB (typical)；
≤ 0.5dB (Max)； | Return Loss | UPC ≥ 40dB
APC ≥ 50dB |
| Tension Strength | ≥ 30N | Operationg Temp | -40 ~ +75 ℃ |
| 3D Interfercometer (Only available if customer requested) |
| Type | Radius (mm) | Apex offset (um) | Fiber (nm) |
| PC (Φ 2.5mm ) | 10 ~ 25 | ≤ 70 | -100~+100 |
| APC (Φ 2.5mm ) | 5~ 15 | ≤ 70 | -100~+100 |
Installation Introduction:
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.
Other Type of Connectors.
Product Tags:
|
|
FTTH ESC250d Field Assembly Quick Connector SC UPC Fiber Connector Images
|
